document number: 89177 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 09-dec-09 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 trench mos barrier schottky rectifier ultra low v f = 0.58 v at i f = 2.5 a vt10200c, vft10200c, vbt10200c, VIT10200C vishay general semiconductor new product features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 275 c max. 10 s, per jesd 22-b106 (for to-220ab, ito-220ab and to-262aa package) ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in high frequency converters, switching power supplies, freewheeling diodes , or-ing diode, dc-to-dc converters and reverse battery protection. mechanical data case: to-220ab, ito-220ab, to-263ab and to-262aa molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 2 x 5.0 a v rrm 200 v i fsm 80 a v f at i f = 5.0 a 0.65 v t j max. 150 c 1 2 3 1 k 2 3 1 2 k pin 1 pin 2 pin 3 k pin 1 pin 2 k heatsink pin 1 pin 2 pin 3 pin 1 pin 2 case pin 3 1 2 3 to-220ab to-263ab to-262aa ito-220ab vt10200c vft10200c VIT10200C vbt10200c tmbs ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol vt10200c vft10200c vbt10200c VIT10200C unit maximum repetitive pe ak reverse voltage v rrm 200 v maximum average forward rectified current (fig. 1) per device i f(av) 10.0 a per diode 5.0 peak forward surge current 8. 3 ms single ha lf sine-wave superimposed on ra ted load per diode i fsm 80 a non-repetitive avalanche energy at t j = 25 c, l = 60 mh per diode e as 30 mj peak repetitive reverse current at t p = 2 s, 1 khz, t j = 38 c 2 c per diode i rrm 0.5 a voltage rate of change (rated v r ) dv/dt 10 000 v/s isolation voltage (ito-220ab only) from terminal to heatsink t = 1 min v ac 1500 v operating junction and storage temperature range t j , t stg - 40 to + 150 c www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 89177 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 09-dec-09 vt10200c, vft10200c, vbt10200c, VIT10200C vishay general semiconductor new product notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics per device electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit breakdown voltage i r = 1.0 ma t a = 25 c v br 200 (minimum) - v instantaneous forward voltage per diode i f = 2.5 a t a = 25 c v f (1) 0.81 - v i f = 5.0 a 1.10 1.60 i f = 2.5 a t a = 125 c 0.58 - i f = 5.0 a 0.65 0.73 reverse current per diode v r = 180 v t a = 25 c i r (2) 1.7 - a t a = 125 c 1.8 - ma v r = 200 v t a = 25 c - 150 a t a = 125 c 2.5 10 ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol vt10200c vft10200c vbt10200c VIT10200C unit typical thermal resistance per diode r jc 3.5 7.0 3.5 3.5 c/w per device 2.5 5.5 2.5 2.5 ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab vt10200c-e3/4w 1.88 4w 50/tube tube ito-220ab vft10200c-e3/4w 1.72 4w 50/tube tube to-263ab vbt10200c-e3/4w 1.37 4w 50/tube tube to-263ab vbt10200c-e3/8w 1.37 8w 800/reel tape and reel to-262aa VIT10200C-e3/4w 1.44 4w 50/tube tube ca s e temperature (c) average forward rectied current (a) 12 4 0 25 50 75 100 125 vft10200c mounted on s pecic heat s ink 2 10 8 6 0 150 v(b,i)t10200c re s i s tive or inductive load 0 2 4 7 10 011 average forward current (a) average power di ss pation (w) 3 5 9 9 7 5 3 1 1 10 8 6 4 2 6 8 d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 89177 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 09-dec-09 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 vt10200c, vft10200c, vbt10200c, VIT10200C vishay general semiconductor new product fig. 3 - typical instantaneous forward characteristics per diode fig. 4 - typical reverse characteristics per diode fig. 5 - typical juncti on capacitance per diode fig. 6 - typical transient thermal impedance per device in s tantaneou s forward voltage (v) 0 0.2 0.4 0.8 1.2 1.6 100 10 0.1 0.6 1.0 in s tantaneou s forward current (a) 1 1.4 t a = 150 c t a = 125 c t a = 25 c t a = 100 c 20 30 40 50 60 70 80 90 100 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (ma) 0.1 0.01 0.001 0.0001 10 1 t a = 150 c t a = 125 c t a = 25 c t a = 100 c 1000 0.1 1 10 100 rever s e voltage (v) junction capacitanc e (pf) 10 100 t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p 10 1 0.01 0.1 1 10 100 t - pul s e duration ( s ) tran s ient thermal impedance (c/w) v(b,i)t10200c junction to ca s e vft10200c www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 89177 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 09-dec-09 vt10200c, vft10200c, vbt10200c, VIT10200C vishay general semiconductor new product package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pin 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pin 3 2 1 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 (8.89) 0.330 (8.38) to-262aa heatsink pin 2 pin 1 pin 3 0.401 (10.19) 0.381 (9.68) 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) 123 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) pin 0.411 (10.45) max. 0.250 (6.35) min. 30 (typ.) (ref.) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.104 (2.65) 0.096 (2.45) 0.057 (1.45) 0.045 (1.14) 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) k 0.380 (9.65) 0.41 1 (10.45) 0.320 (8.13) 0.360 (9.14) 0.591(15.00) 0.624 (15.85) 1 2 0.245 (6.22) min k k 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.014 (0.36) 0.021 (0.53) 0.110 (2.79) 0.140 (3.56) 0.110 (2.79) 0.090 (2.29) 0.047 (1.19) 0.055 (1.40) 0 to 0.01 (0 to 0.254) 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) to-263ab 0.105 (2.67) 0.08 (0.095) (2.41) (2.032) 0.42 (10.66) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) 0.33 (8.38) mounting pad layout min. min. min. min. www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
